 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Shenzhen KYL Communication Equipment Co., Ltd KYL-600L Wireless audio Module User Manual Shenzhen KYL Communication Equipment Co., Ltd Address: C3705-3707, Huangdu Square, Exhibition Center South, Yitian Road, Futian District, Shenzhen, Guangdong, China 518048 Tel: 86-755-82943662 Fax: 86-755-83408785 SkypeKYL-Sunny Yahoo: KYL_Sunny@yahoo.com MSN: KYL-Sunny@hotmail.com Email: sales02@rf-data.com Website: http://www.rf-data.com Fax: 86-755-83408785 sales02@rf-data,com www.rf-data.com Shenzhen KYL Communication Equipment Co., Ltd Before using the product, please read this use manual carefully. Any questions, welcome to contact us. About KYL-600L: KYL-600L Audio radio module, adopts double VCO structure, high stability TXCO. With advanced arithmetic fault-rectify system in software design, it has high stability and reliability. This module is usually used for industry control, water conservancy, electric, oil field management, wireless alarm so on. Moreover, we can extend its functions and ODM products for you according to your specific application. 1. Specifications: * Operating Voltage: DC 5V * Carrier Frequency: VHF/UHF 230-400MHz * Interface: standard RS-232/RS-485/TTL Selectable * Baud Rate: 1200/2400/4800bps Selectable * Channel spacing: 25kHz * Frequency stability: 2.5ppm * Modulation: FFSK; Channels: 16 * Impedance: 50 * Transfer distance:3km(BER=10-3@9600bps); * * * Temperature: -25 ~+65 Size: 70x46x12mm(without antenna port) Weight:180g * * * * * * * * 2. Receiver: Receiving sensibility: 0.25V (12dB SINAD) Signal-to-Noise: -40dB Adjacent channel selectivity: 70dB Inter-modulation rejection: 65dB Clutter and images rejection: 70dB Receiving current: 50mA Audio Output power: 0.5W810 distortion Receiving distortion: 3 3. Transmitter: RF power: 500mW 1W/2W customized Transmitting current: 300mA Modulation: FFSK Audio distortion: 3% Frequency deviation: 5.0kHz Adjacent channel power: 70dB Transmitter start up time: 50m Surplus Frequency Modulation: -40dB Modulation distortion: 3 Modulation sensibility: 5mV Transmission distance: 3Km sales02@rf-data,com www.rf-data.com * * * * * * * * * * * Fax: 86-755-83408785 Shenzhen KYL Communication Equipment Co., Ltd * Volts D.C.: 5V (12V optional) * 4. Features of KYL-600L: 1) Design based on the special use of the wireless voice transmission in the industrial automation field. 2) High stability, good reliability and low power consumption 3) Standard connection: RS-232/485/TTL 4) Facility for installation and maintenance, Flexible networking configuration, suitable for the field of multiple point but decentralization and complex geography environment. 5) Metal shell, good shielding performance, providing frequency passage. 6) Providing many MODEM communication protocols 7) To adapt different user structure, we can develop various size modules and offer sufficient technology support for client use the module and second development for free. 5. Size Product dimension: 70x46x12mm Antenna connection: TNC (SMA) -50 Interface definition: 6. Applications: * Industrial automatic control and remote control * Wireless data acquisition and SCADA * Environment monitoring systems * AMR Automatic Meter Reading * Wireless alarm and security systems * Building automation, security, wireless monitoring and control of room equipment, Access Control System; * Wireless data transmission, automatic data collection system; * Low power telemetry * Wireless conference voting system; * Sports training & competition; * Wireless POS, PDA wireless smart terminal; * Electronic bus station and intelligent traffic; * RF transmitter Wireless electronic display screen and queuing Fax: 86-755-83408785 sales02@rf-data,com www.rf-data.com Shenzhen KYL Communication Equipment Co., Ltd machine; * Wireless telemetry Charging for parking, parking lot; * Wireless modem Automobile inspection and four-wheel orientation; * Wireless sensor Industrial wireless remote control and air conditioning remote controller; * Data communication used for railway, oil field, dock and army. * LED display in thruway and public places * Point to multi-point wireless network, wireless on-the-spot bus and automatic data collection system; * 7. The installing schematic 8. Notice 1) The antenna should be away from the power supply if use the switch power, because the transmitting of the antenna may affect the normal work of the switch power. When the transmission happen fault, checking the power voltage whether interfered from the antenna is one way of eliminating fault. 2) Use the min. grain wave and high anti-jamming switch power or batteries 3) The power capacity must meet D.C. 5~12V,more than 800mA output current 4) The space between the experiments Radio should be more than 5m. The antenna should span on the high to increase the distance of electric wave. It is important for using shortwave communication equipment in the city. 5) After connecting the antenna to the Radio, the space between the Radios should more than 10m, so avoid signal backup. 6) The antenna plywood should nip in the connection inside the antenna, but not nip the antenna projectile, so avoiding the performance of the antenna. 7) High frequency cable don't come down directness, circle a circuit and fix up it on the frame for the best. 9. Standard configuration and Antenna configuration i: Standard configuration: * One KYL-600L RF module * A 9pin flat Connection Line Fax: 86-755-83408785 sales02@rf-data,com www.rf-data.com Shenzhen KYL Communication Equipment Co., Ltd * A whip antennaabout 10cm ii: Antenna configuration: Many appropriative antennas for low power RF modules are selected to meet different user's antenna configuration. Please ask our Sales office for further information about the antenna's dimension and performance. The main options of antennas are exterior flabelliform rubber antenna with helical SMA joint, small osculum antenna, small rod antenna and elbow antenna. If the user has special demands on antennas, we can design and produce individually. a. Helical SMA antennas: KYL-ANT-S868-5-SMA b. Elbow antenna: KYL-ANT-S433L-10-ESMA c. Small rod antenna: KYL-ANT-S433-4-RSMA d. Small osculum antenna: KYL-ANT-O433S-300H1.5-SMA Fax: 86-755-83408785 sales02@rf-data,com www.rf-data.com |
Price & Availability of KYL-600L1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |